6000w stainless steel fiber laser cutting machine

Generally, inert gas is used for melting and cutting. If oxygen or other active gas is used instead, the material will be ignited under the irradiation of laser beam, and another heat source will be generated due to the intense chemical reaction with oxygen to further heat the material, which is called oxidation melting and cutting.

Because of this effect, the cutting rate of structural steel with the same thickness can be higher than that of melting cutting. On the other hand, the quality of the incision may be worse than that of the melt cutting. In fact, it will produce wider slits, obvious roughness, increased heat affected zone and worse edge quality. Laser flame cutting is not good at machining precision models and sharp corners (there is a danger of burning the sharp corners). Pulse mode lasers can be used to limit thermal effects, and the power of the laser determines the cutting speed. In the case of a certain laser power, the limiting factor is the supply of oxygen and the thermal conductivity of the material.

Carbon dioxide series: Carbon dioxide optical lens, excitation module, high pressure module, turbine, Focusing mirror, Bypos mirror, refractor, cutting head, nozzle, Ceramic Ring, dust cover

Optical fiber series: push in nozzle, Protective Lens, sapphire lens, ceramic ring, cutting head, cutting head accessories, ipg module, communication module, communication cable, protective cover, various filter elements, pressure reducing valve, Nozzle Body, quick-insert nozzle body, adaptor 2.0, servo, Motor, power supply, CNC rack, highyag cutting head, collimator Lens, focusing mirror and more.