Vacuum pump oil for fiber laser cutting machine

Main features:
1. Vacuum Pump Oil has excellent rust and Corrosion resistance, which can form a very effective anti-corrosion film on the metal surface, thus preventing the system corrosion caused by inhaling corrosive gas and water.
2. It has good oxidation stability, and it will not deteriorate in long-term direct contact with air, resin and chemical raw materials in high-temperature environment, reducing the formation of harmful paint film and oil dirt, and providing a long oil change cycle.
3. Vacuum pump oil can quickly separate the water carried in the oil to the required degree of authenticity.
4. The vacuum pump oil has a lower vapor pressure to prevent the oil from backflow and diffusion from the pump cavity to the vacuum system. So as to ensure that there is enough limit vacuum.
CNC Bending Machine manufacturers remind you of the relevant precautions:
(1) The oil loading window must be clean and clean. It is strictly forbidden to expose it to the West and open air in the sun. It should be stored in a dark, dry and ventilated place.
(2) When taking oil or loading oil, the light rain around the drum cover must be removed to prevent the impurities from mixing into the oil and causing pump wear.
(3) Different brands and varieties of vacuum pump oil can not be mixed, old and new oil products can not be mixed.
(4) Strictly avoid mixing vacuum oil with other lubricating oil, let alone light oil, which will affect the vacuum performance.
(5) Vacuum pump should try to avoid the extraction of solvents, steam and corrosive gases, must be frequently checked and replaced
(6) When changing the oil, drain the used oil in the pump body, and slowly turn the pump shaft after pouring the new oil.