All Products (Total 501 Products)
Model No.: 1
Old and new: New
A variety of different efficient lasers are available, which is one of the brand characteristics of Bystronic. All lasers are of first-class quality and energy saving due to their high efficiency. The catalogue includes both fiber lasers and co? Lasers. Performance and features: 1. QC12Y series hydraulic tilting plate...
Model No.: 1
Old and new: New
30t CNC fast bending machine Performance and features: 1. The standard is 3 + 1 axis - Y1 (upper and lower of left cylinder), Y2 (upper and lower of right cylinder), X (before and after the rear gear), V (hydraulic deflection compensation); 2. Streamline design, high configuration, high precision and high efficiency...
Model No.: 1
Old and new: New
Performance and features: 1. Streamline design, high configuration, high precision and high efficiency all CNC bending machine equipment; electro-hydraulic servo system, full closed-loop control slider synchronization; 2. The standard is 3 + 1 axis - Y1 (upper and lower of left cylinder), Y2 (upper and lower of right...
Model No.: 1
Old and new: New
Laser is a kind of light. Like other natural light, it is produced by atom (molecule or ion) transition. However, it is different from ordinary light in that the laser only depends on spontaneous emission in the first very short time, and the subsequent process is completely determined by the excitation radiation....
Model No.: 1
Old and new: New
In the world market, it is developing towards the direction of high power, large breadth and thick plate. With the advancement of major projects such as railway construction, highway construction, water conservancy construction, hydropower construction, energy, mine construction and construction industry in China,...
Model No.: 1
Old and new: New
High power laser cutting machine for its hardware requirements are also higher. The upgrade of the whole equipment parts will make the cost of the whole equipment skyrocket. Therefore, in selecting the power of equipment, we should consider the value that can be accepted by itself.
Of course, if your processing plate...
Model No.: 1
Old and new: New
One of the advantages of laser cutting is the high energy density of the beam, generally 10W / cm2. Because the energy density is inversely proportional to the area, the focal spot diameter should be as small as possible to produce a narrow slit; at the same time, the focal spot diameter is also proportional to the...
Model No.: 1
Old and new: New
Laser cutting is to replace the traditional mechanical knife with invisible beam. It has the characteristics of high precision, fast cutting, not limited to cutting pattern limitation, automatic typesetting and material saving, smooth cutting, low processing cost, etc. it will gradually improve or replace the...
Model No.: 1
Old and new: New
In the world market, it is developing towards high power, large width and thick plate. With the advancement of China's railway construction, highway construction, water conservancy construction, hydropower construction, energy, mine construction, construction industry and other major projects, large area thick steel...
Model No.: 1
Old and new: New
Equipment configuration features: 1. The fiber laser adopts the semiconductor modular and redundant design, there is no optical lens in the resonant cavity, and it does not need the start-up time. It has the advantages of no adjustment, no maintenance and high stability, and reduces the cost of accessories and...
Model No.: 1
Old and new: New
CNC bending machine is a kind of forging machinery, the main role is metal processing industry. The products are widely used in light industry, aviation, shipbuilding, metallurgy, instrument, electrical appliances, stainless steel products, steel structure construction and decoration industries. The bending machine is...
Model No.: 1
Old and new: New
Stainless steel cutting equipment The special light curtain for laser protection device of bending machine can be used for plate bending, folding box, z-bending and other forms of workpiece. It is more convenient for users to switch modes by centralizing all functions on the operation panel. Built in power stability...
Model No.: 1
Old and new: New
Laser cutting machine is to focus the laser emitted from the laser into a high power density laser beam through the optical system. The laser beam irradiates the surface of the workpiece to make the workpiece reach the melting point or boiling point. At the same time, the high-pressure gas coaxial with the laser beam...
Model No.: 1
Old and new: New
Material analysis
With the development of laser cutting technology, laser cutting is used in more and more fields, and more and more materials are used. But different materials have different characteristics, so there are different points to be paid attention to when using laser cutting. structural steel
When the...
Model No.: 1
Old and new: New
Compared with the traditional oxyacetylene and plasma cutting processes, Laser accessories，laser cutting has the advantages of fast cutting speed, narrow cutting seam, small heat affected zone, good perpendicularity of cutting seam edge and smooth cutting edge. At the same time, there are many kinds of materials that...
Model No.: 1
Old and new: New
Cutting quality Cutting accuracy is the first factor to judge the quality of CNC laser cutting machine. There are four factors that affect the cutting accuracy of CNC laser cutting machine: 1. The size of the laser coagulation of the laser generator. After gathering, if the spot is very small, the cutting accuracy is...
Model No.: 1
Old and new: New
Quick Details Application:Laser Cutting Condition:New Applicable Material:Metal Laser Type:Fiber Laser Equipment configuration features: 1. The whole machine is transmitted by optical fiber without complicated guiding system such as reflector. The optical path is simple, the structure is stable, and the external...
Plasma metal cutting machine It can be used for cutting, punching and engraving various precision parts and machine panel.The products processed by the laser cutting machine have little heat effect on the cutting seam and generally do not need secondary processing.Product Introduction. The special light curtain for...
Model No.: 1
Old and new: New
Equipment configuration features: 1. The fiber laser adopts the semiconductor modular and redundant design, there is no optical lens in the resonant cavity, and it does not need the start-up time. It has the advantages of no adjustment, no maintenance and high stability, and reduces the cost of accessories and...
Model No.: 1
Old and new: New
When the laser cutting machine is working, if it breaks down, it is very dangerous. The novice must be trained by professional personnel to operate independently. According to the experience, 13 details of the safety work of the laser cutting machine are summarized 1. Observe the safety operation regulations of...
Model No.: 1
Old and new: New
Sheet metal laser cutting machine Use of laser cutting machine There are many materials that can be cut. The laser cutting machine can cut acrylic, wood, cloth, leather, metal, etc. according to the size of the power range, it can be used in different industries. The cutting of cloth can be used in garment making,...
Model No.: 1
Old and new: New
There are three simple methods to determine the focus position in industrial production: (1) Printing method: make the cutting head move from top to bottom, and print with laser beam on the plastic plate, with the smallest printing diameter as the focus. (2) Inclined plate method: use the plastic plate placed at an...
Model No.: 1
Old and new: New
Cut hole Cutting and piercing technology: any kind of hot cutting technology, except for a few cases can start from the edge of the plate, generally must be a small hole in the plate. In the earlier laser stamping compound machine, a punch was used to punch out a hole first, and then the laser was used to start...
Model No.: 1
Old and new: New
Laser type: Co2
There are two kinds of laser cutting technology: one is that pulse laser is suitable for metal materials. The second is that continuous laser is suitable for non-metallic materials, the latter is an important application field of laser cutting technology. Several key technologies of laser cutting machine are...
