Ceramic rings &ceramic bodies

Ceramic Ring Replacement needs to spin off the nozzle first, followed by the Ceramic Ring Lock Master Spin, note that in the process of rotating fingers to resist the old ceramic ring to prevent vertical sliding down. In the replacement of ceramic ring, need to cut the bottom of the copper pillar to the induction hole, normal alignment of good ceramic ring is horizontal, will be a bit elastic, around can not rotate. Then the finger is pressed against the ceramic ring and the locking block, and finally the nozzle is screwed on to complete the installation. At the same time, after the installation is completed, it is necessary to debug the beam path to prevent the deviation of the light.The advantage of Zirconia ceramic ring is its extremely small Coefficient of thermal expansion (High temperature resistance) , high density (wear resistance) , High resistivity. Such a Ceramic Body can effectively ensure the insulation of important parts and cutting head, and further reduce the loss of cutting head.